How to perform Pregnancy tests through Pregnancy test strips?

4 min readJul 9, 2021

MomMed is offering Pregnancy test strips that detect the presence of the human Chorionic Gonadotropin (HCG) hormone in humans. It is used for testing the pregnancy in the early stage.

The level of HCG is a non-pregnant women is less than 5mIU, but can rise to approximately 100mIU before your missed period. The pregnancy test strips can detect a minimum of 20mIU of HCG which would be detectable as early as seven days after conception. In any case we recommend that you delay testing until the first day of your missed period to get a reliable outcome.

How to do an Ovulation/ pregnancy test?

The very first step of the Ovulation/ pregnancy test is to collect a sample of urine.

Collect urine specimens in a neat and dry container. It is more competent to test the sample in the morning if test pregnancy test strips as it ordinarily contains the most significant HCG levels of the day, yet ovulation test can be utilized at any time, betteris be taken between 11am to 8pm as the luthinizing hormone (LH) is higher in the afternoon.

Pregnancytest strips ：

Open the packet and eliminate the strip.

Place it upward (straight) into the urine sample, ensuring the arrows go down. Do not let the urine surface go over the test strip’s most extreme line (set apart by bolts).

Keep the strip in the sample of urine for at least 8 seconds (suggest 10 seconds).

Eliminate the pregnancy test and spot on a dry level surface.

Now, wait for the results. First, check out the color bands that will appear on the strips Trust, contingent upon the HCG concentration; results can be seen in just 40 seconds. Nonetheless, to affirm an adverse outcome, the total response time (5 minutes) is required.

Dispose of the test after use, put the used strip of test in a special holder, and see it as irresistible if conceivable.

Ovulation test strips:

Open the packet and eliminate the strip.

Place it upward (straight) into the urine sample, ensuring the arrows go down. Do not let the urine surface go over the test strip’s most extreme line (set apart by bolts).

Keep the strip in the sample of urine for at least 8 seconds (suggest 10 seconds).

Eliminate the ovulation test and spot on a dry level surface.

Now, wait for the results. First, Results should be read with in 10 minutes of taking the test

How to check the results? (Pregnancy test strips）

1. POSITIVE RESULT
On the off chance that two lines show up on the test strip, then the results are positive. This means you are pregnant. One line may seem lighter than the other. However, the two of them will be of similar thickness. A weak line is bound to happen when you try early and your HCG levels are low.

2. NEGATIVE RESULT
If only one colored line shows up on the test strip, then the results are negative. In this case, you are either not pregnant, or you may have tried too soon. In the event that you are uncertain, perform the same test after 48 hours with another test strip.

3. INVALID RESULT
If no lines show up anyplace on the test strip or if by some stroke of good luck the test line shows up, the test has not worked as expected and is invalid. This is, for the most part, because of the strip not being sufficiently wet. Repeat the test with another test strip guaranteeing that the strip is dipped in the urine for the full 10 seconds.

How to check the results? （Ovulation test strips）

1. POSITIVE RESULT
A positive result is when the test line is either as dark or darker than the control line.

2. NEGATIVE RESULT
A negative result is when the test line is lighter than the control line

How accurate is the Ovulation predictor test?

In research center tests, Clear and Simple pregnancy test strips have been demonstrated to be more than 99% exact when used on your missed period.

Also, Read More Related Tests

How to perform Pregnancy tests through Pregnancy test strips?

Written by Mommed Tech